Ipod disabled connect to itunes without computer

There are several models of the iPod, including the iPod Nano, Shuffle and Touch. Each iPod has its own method of resetting the device without having to connect it to iTunes. Once you have reset the iPod, you can access the device again. However, after a reset, most of your content remains but your settings get restored to the iPod's default configuration.

Knowing how to reset your iPod comes in handy if it has frozen before or during your company's presentation and you need it to access audio.

Reset iPod Nano

The Nano is really easy to reset if you forgot iPod password without iTunes being available. Connect your iPod Nano to a power source if you have one available. You can also run off the battery if needed. Just make sure it has a good charge.

Press the Sleep/Wake button and the Volume Down buttons together. Continue the simultaneous hold for a good eight seconds. This will send the iPod Nano into a reset. If it does not work, you may not have held the buttons down at the exact same time. Repeat the same process one more time to reset and unlock the iPod.

Reset iPod Shuffle

The Shuffle model has a process that differs from the Nano. Go ahead and slide the switch to the Off position, and wait for a full five seconds. Return the switch to the On position and hold until the green stripe appears.

Your iPod Shuffle will reset to normal after running this basic power cycle. You are not required to sign in to iTunes or take any special steps. You can only add and subtract music through iTunes but the reset allows the iPod to function normally otherwise.

Reset iPod Touch

Like most iPod models, the Touch is also really easy to use. The primary difference is the touch screen, which essentially created an iPod with a more robust set of menu options and controls. The previous models were limited to a few basic buttons and did not have a touch screen. The lack of additional buttons helped to keep the devices compact.

Hold the Sleep/Wake button until the Slide to Power Off slider shows up. Swipe from left to right to turn the iPod off. If your iPod doesn't respond, continue to the next step. The touch screen can become problematic if your iPod touch has been exposed to water or any abuse.

Press the Sleep/Wake and Home buttons for 10 seconds. Continue holding until you see the Apple logo. This will reset your iPod Touch. Both methods of running the power cycle are equally effective, and they take a matter of seconds to execute.

Older iPod Models

On older iPods that have a scroll wheel, touch wheel or dock connector, slide the Hold switch on and off. Hold the Play/Pause and Menu buttons together for about eight seconds. Repeat this process until the iPod resets.

When your iPod is disabled for some reason, this reset will usually restore performance to normal. If the reset does not work, you may require additional troubleshooting through iTunes to restore functionality. You may need to perform a password reset to access your iTunes account for this process. In most cases however, a simple reset is sufficient.

It's really awful if you lost or forgot the password of your iPod touch. In this situation, you may need to get optional solutions to unlock iPod touch without iTunes or computer. These solutions are elaborated in this article.

Part 1. In What Kind of Situation Will iPod Be Disabled?

Wrong passcode will result in iPod Being Disabled and saying "try again in 2437982 minutes"

Your incorrect attempts to unlock iPod touch will result that the device being locked. So it is advisable not to enter the passcode again if you are not sure that the correct passcode is.

iPod is disabled connect to iTunes

This situation often happens when you enter the wrong passcode for more than 6 times. When your iPod touch is disabled connect to iTunes, the iPod will be fully locked.

Part 2. Effective Methods to Unlock Disabled iPod without iTunes

Actually, it is not difficult to unlock iPod without iTunes and computer, the tutorials below will help most users increase the awareness of this issue to relieve their anxiety.

Unlock iPod via Siri

Many users who need to unlock disabled iPod touch prefer to using Siri, since it can be performed without iTunes or computer. And the existing data on the iPod Touch will not be affected either. Here are the steps:

1. Activate Siri by keeping pressing the home button on your iPod Touch.
2. Ask the question of what time it is and a clock will be displayed on the home screen.
3. Click the Clock icon and hit on + icon on the right corner of the screen. Then enter any numbers or characters into the search bar.
4. Keep pressing the characters to copy the text. Then click on Share and various options that you can share the texts with will be displayed.
5. Choose the option of Message and a new message interface will pop up.
6. Paste the text into the To field and click on the Return button in the right hand corner of the screen.
7. Click on Create New Contact, and then click on Add Photo on the next screen.
8. Finally, click on Choose Photo option and Home button. After a while, the passcode will be bypassed.

Cons of This Method:

• It is a bug for iOS 10 and easier versions, and has been fixed after the release of the new iOS version. That's to say, this method is only workable for iOS versions older than iOS 10.
• The passcode on iPod will not be removed permanently via this method. That means you need to follow the steps above each time you need to access your disabled iPod.

Reset Disabled iPod without iTunes via iCloud

This is an official way that can be used to unlock iPod Touch on condition that Find My iPhone has been enabled. The passcode can be removed by completely erasing the device. See the steps below to unlock disabled iPod without iTunes and computer through iCloud.

1. Go to iCloud website in any web browser.
2. Sign in with your Apple account username and password.
3. The iPod Touch should appear in the list of devices.
4. Click on the action option at the bottom of the screen.
5. Click on Erase iPod touch. This will erase all the data including the screen passcode on the iPod touch.

Cons of This Method:

• "Find My iPod" must be turned on and your iPod Touch should be signed in with an iCloud account.
• The iPod should be connected with the stable internet.

Unlock iPod Touch without iTunes in One Click

The most simple way to unlock iPod Touch without iTunes is using FoneGeek iPhone Passcode Unlocker. This desktop software provides the feature of unlocking disabled iPhone/iPad/iPod Touch in only one click. No need to install iTunes on your computer.

What Can You Enjoy with FoneGeek iPhone Passcode Unlocker:

• Easy guide is provided to unlock all models of iOS devices without any difficulty.
• It can remove the screen passcode as well as Apple ID without passcode.
• All iPod Touch, iPhone and iPad modes are supported. And the latest iOS 16 is supported as well.

Step 1. As the desktop software, this program should be downloaded on your computer. After that, click the software icon to open it. Then click on "Unlock Screen Passcode".

Step 2. The iPod Touch may not be detected since it is locked. If so, follow the instructions on the program to put the device into DFU or recovery mode.

Step 3. Then choose the firmware package that matches your iPod Touch and tap on "Download" to proceed.

Step 4. After downloading the firmware, click on "Start Unlock" to continue the unlocking process. The passcode will be removed after that. Then restart your iPod Touch to reset a new passcode.

Unlock iPod Touch without iTunes on Windows Computer

If you have a computer running Windows OS version, you can unlock iPod without iTunes on your Windows computer. Here are the steps for that:

Step 1. Connect the iPod touch to your computer. If iTunes launches automatically, close it.

Step 2. Then go to Computer > Devices with Removable Storage and you’ll view your iPod touch.

Step 3. Open the iPod touch folder. To show the key folder, head over to Tools > Folder options > view tabs > show hidden files, folders, and drive.

Step 4. You will find the iPod_Control folder. Scroll to find the "_locked" file and change the name to "_unlocked". The iPod passcode will soon be removed.

Part 3. How to Unlock Disabled iPod with iTunes

Unlock iPod by Restoring iTunes Backup

If you have synced your iPod touch with iTunes previously, you can restore your iPod touch with iTunes backup to avoid data loss. This can be done with iTunes on your computer. It sounds to be easy, but it will not succeed if your device cannot be recognized.

• Connect the disabled iPod on your computer and click on Summary of iPod in iTunes.
• Then click on Restore Backup button and you will see a pop-up box asking you to choose one backup for the restore. Just select one iTunes backup and click Restore.

Restore iPod Touch by iTunes in Recovery Mode

You may also need to know how to use recovery mode to unlock your disabled iPod Touch. However, the iPod Touch data and settings will completely be erased. Here are the steps:

• On your computer, launch iTunes and connect the iPod Touch to the computer.
• After the iPod Touch is connected, keep pressing the Home button and the top button for 8 seconds until you can see iTunes icon on the screen.
• When iTunes detected the iPod Touch being in recovery mode, click Restore on the pop up window and the latest iOS version will be downloaded on the device.

Cons of This Method:

• Unknown errors may arise and damage your iPod Touch system.
• It is not workable if the iPod Touch screen is broken.

Conclusion

You can use the solutions above to unlock iPod Touch without iTunes. There may also be other effective solutions to unlock the disabled iPod and you can let us know by submitting a comment below.

How do you unlock an iPod that is disabled and says connect to iTunes?

How do you Undisable an iPhone that says connect to iTunes without a computer?

How do you reset an iPod without a computer?