The following four simple modifications can been done to improve overall performance, accuracy, and manipulation on any Glock handgun. Once you have the necessary parts needed for you Glock these four modifications can be completed in under and hour!
1. Sights – On my Glock 26 I replaced the stock sights with Ameriglo Defoor Tactical sights. My Glock 17 came with Ameriglo Sights; front red fiber optic and all black rear sight. One of the single best things you can do when you purchase a new handgun is ditch the stock sights which are typically crap. For the price you cannot beat the Ameriglo sights. A feature I look for when shopping for new sights is that the rear sight is squared off so that you can rack the slide off of your belt or holster using only one hand.
2. Slide Stop – On my Glock 17 I have removed the factory slide stop and replaced it with a Vickers Tactical extended slide stop. The Vickers slide stop has a tad bit more surface area and has a more aggressive texture making it easier to manipulate in sweaty, bloody, wet conditions, or with gloves on.
3. Combat Trigger Job – There are so many options out there to customize the trigger on a Glock. If you’re a competition shooter then have at it, but if this is your carry gun I would stick with stock parts. What the combat trigger job entails is keeping all the stock trigger parts, but polishing all the bearing surfaces to give a smoother trigger pull and reduces the factory creep. For the polish I use Flitz polish and a few Q-Tips. Just doing this created a smoother trigger pull.
4. Recoil Spring – I have replaced the factory plastic recoil spring guide rods in both my Glock 26 and Glock 17 with stainless steel guide rods. This will provide you with better overall shot to shot accuracy due to the fact that the factory plastic guide rod can bind from shot to shot. The stainless steel does not bind and creates a tighter barrel to slide lockup.
Ameriglo Defoor Tactical Sights – Buy it on Amazon
Vickers Tactical Slide Stop – Buy it on Amazon
Stainless Steel Recoil Spring – Buy it on Amazon
I try to keep the maintenance of my Glock handguns as simple as possible. My maintenance kit consists of the following items. I like to keep my kit minimal and serve its intended purpose. I’ve seen way too many cleaning/maintenance kits that rival mechanics tool boxes! KISS – Keep It Simple Stupid.
Glock tool – Buy it on Amazon
Read Next: Review: AmeriGlo Hackathorn Glock Night Sights
FireClean – Buy it on Amazon
9mm bore snake – Buy it on Amazon
Cleaning brush – Buy it on Amazon
Gun cloth – But it on Amazon
-Scott
5.0 out of 5 stars Excellent Quality Precision Machining
Reviewed in the United States on May 12, 2022
Very impressed with the quality that results in an exact fit that looks factory. The finger loop design makes racking the slide on my Glock 22 easy. My wife says it makes racking the stiff slide is now much easier. Big improvement! Gone is the difficult finger pinching technique, just hook one finger in the loop and give it a yank. Painless and fast. Does not interfere with holsters or sights. Installed in five minutes. U-Tube videos show how to correctly remove the slide end cap and replace with the loop. No installation instructions were included. There are springs to manage, but it is simple. Highly recommend.
Reviews with images
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States 🇺🇸 on September 9, 2022
Great product, works great
Reviewed in the United States 🇺🇸 on September 9, 2022
Reviewed in the United States 🇺🇸 on August 4, 2022
I could no longer grip my slide to cock my Glock 20. I now able to use my index finger to cock it. I'm able to shoot again the gun I love.
Reviewed in the United States 🇺🇸 on August 21, 2022
Reviewed in the United States 🇺🇸 on May 12, 2022
Very impressed with the quality that results in an exact fit that looks factory. The finger loop design makes racking the slide on my Glock 22 easy. My wife says it makes racking the stiff slide is now much easier. Big improvement! Gone is the difficult finger pinching technique, just hook one finger in the loop and give it a yank. Painless and fast. Does not interfere with holsters or sights. Installed in five minutes. U-Tube videos show how to correctly remove the slide end cap and replace with the loop. No installation instructions were included. There are springs to manage, but it is simple. Highly recommend.
5.0 out of 5 stars Excellent Quality Precision Machining
By Kaare Wold on May 11, 2022
Very impressed with the quality that results in an exact fit that looks factory. The finger loop design makes racking the slide on my Glock 22 easy. My wife says it makes racking the stiff slide is now much easier. Big improvement! Gone is the difficult finger pinching technique, just hook one finger in the loop and give it a yank. Painless and fast. Does not interfere with holsters or sights. Installed in five minutes. U-Tube videos show how to correctly remove the slide end cap and replace with the loop. No installation instructions were included. There are springs to manage, but it is simple. Highly recommend.
Images in this review
Reviewed in the United States 🇺🇸 on May 2, 2022
This product works perfectly fine, installs easily, and has good construction. So it's still five stars. Unfortunately it sits around as extra parts, in my case, since I bought it for use with my recover tactical 20/20 brace for the Glock 19, and it sat just a little too long, so it would hit the back inside end of the brace not allowing me to rack a round. I would definitely recommend this if you just want something else of use to rack a round while functioning the pistol ina standard fashion. Also it seated perfectly fine with my non OEM slide.
Reviewed in the United States 🇺🇸 on July 22, 2022
Purchased this for my mothers gun, her hand is getting weak and this helped her greatly. Very light, no rough edges. Gen 3 glock
Reviewed in the United States 🇺🇸 on August 4, 2022
Used on Glock pistols.....