Hoover dual power max carpet washer belt replacement

Hoover Dual Power MAX Carpet Washer Belt (Non-Stretch)

Fits the Following Carpet Washer Models:
FH51000, FH51000RM FH51001, FH51000NC, FH51002

Customer Reviews

1. Anonymous User on 10/8/2020, said:

I need to order this belt but I'm trying to find it cheaper. The price is good but a little expensive for this product,.

Was this comment helpful? yes no

(1 people found this comment helpful, 1 did not)

2. Anonymous User on 3/27/2019, said:

I need to order the belt

Was this comment helpful? yes no

(0 people found this comment helpful, 6 did not)

Showing comments 1-2 of 2

5.15 Slide brushroll end cap out to remove.

5.16 Pull both brushrolls toward user to remove from unit.

NOTE: belt will still be attached to unit.

5.17 To remove upper belt cover, remove 7 screws. Arrows

show location of screws.

5.18 Flip cleaner upright and remove upper belt cover from

foot.

5.19 Remove pivot clamp by unscrewing 2 screws.

5.20 Lift pivot clamp off the unit after removing screws.

5.21 The belt shaft is now exposed (as shown in image 5.22)

5.22 Replace belt by placing on shaft.

5.23 Replace pivot clamp and 2 screws over the belt.

5.24 Replace upper belt cover, flip cleaner, and screw in 7

screws.

5.25 Slip brushrolls through belt. NOTE: Place belt on

rounded areas of the brushrolls without brushes.

5.26 With belt in place, push and slide brushrolls into unit,

making sure that the brushrolls are in the correct orientation.

5.27 Slide belt roll end cap back into unit and replace 3

screws.

5.28 Replace belt guard and secure with final 3 screws.

5.21

5.25

IMPORTANT

brush rolls must be rotated to ensure the belt is properly

installed. The belt should be moving as the brush rolls are

rotated. If the brush rolls do not rotate easily then the belt

may not be installed correctly.

5.22

5.26

5.15

5.17

5.19

5.23

5.27

IMPORTANT

Rotate brushrolls manually to make sure belt is not

twisted or pinched.

13

5.16

5.18

5.20

5.24

5.28

Live now! New Rollbacks & more. Save now

Skip to Main Content

Reorder

My Items

ReorderListsRegistries

Sign In

Account

Purchase History

How do you want your items?

  1. Home
  2. Appliances
  3. Vacuums, Steamers & Floor Care
  4. Hoover Vacuums
  5. Hoover Vacuum Parts

Hoover

$24.28

(5.0)5 stars out of 5 reviews5 reviews

$24.28

Out of stock

Currently out of stock

Notice unusual marketplace activity?

Report

Live now! New Rollbacks & more. Save now

Skip to Main Content

Reorder

My Items

ReorderListsRegistries

Sign In

Account

Purchase History

How do you want your items?

  1. Home
  2. Appliances
  3. Vacuums, Steamers & Floor Care
  4. Hoover Vacuums
  5. Hoover Vacuum Parts

Hoover

$14.51

$14.51

$14.51

Price when purchased online

Free shipping, arrives by Fri, Oct 21 to

Want it faster? to see options

Sold and shipped by TOP VACUUM PARTS, LLC | TOP VACUUM PARTS LLC

1275 seller reviews

Free Holiday returns until Jan 31

Notice unusual marketplace activity?

Report

Are all Hoover belts the same?

The major types of vacuum belts are determined by their different shapes. As vacuum designs have improved over the years, new belt shapes have been developed to increase both their durability and their ability to transfer power from the vacuum's motor.

Does a Hoover carpet cleaner have a belt?

Underneath the cleaner is a brush bar that is driven by a rubber belt. It spins around sweeping and beating the dirt out of the carpet and up into the cleaner. The belt will stretch and wear out so it should be replaced once per year or sooner as a precaution if you feel the cleaner is not sweeping up effectively.

Why does my Hoover belt keep snapping?

Common solutions for: Vacuum cleaner belt keeps breaking If too much hair, string, or lint is caught in the brushroll, the brushroll can get stuck. If the brushroll is stuck, it will put too much strain on the belt and may cause the belt to break. Remove the brushroll and clean out any debris from the bearings.

Toplist

Latest post

TAGs